Jiangyin city Sanwei Hydraulic Machine Co., Ltd

Wood fiber feeding machine

Products:
Materials used for fiber-table mixing station Lek quantitative adding wood fiber, polyester fiber and minerals, fiber occasions; Metering is accurate, convenient control, simple maintenance advantages.
A fiber feeding machine design:
1. Feeding System fiber composition and functions:
1-1. Mixing System:
Mixing system uses two mixing, first in the hopper material stirred broken, then ends with the expected drop bowl, fully expected to break even and discharging;
1-2, Fan System:
Using high pressure blower fan of small wind, so as to enable the mixing of the material reached full uniform mixing station mix cylinder;
1-3, Weight Control System:
Weighing control system uses four high-precision weighing sensors, each sensor can be weighing 500kg, the sensor signal-signal wiring box and then, through the control transmitter control motor movements to precise feeding results.
1-4, operating Display System:
Operating system from the keyboard operation, in a vacuum of data displayed on the screen, the keyboard interface in the whole Chinese can be arbitrarily set in the estimate and the estimate that each of the operating system for monitoring;
1-5, printing systems:
Each can estimate a time estimate for a continuous output;
2. Feeding mainly on fiber components:
2-1. Mixing System:
2.2KW mixer for 2; A chain drive system sets;
2-2. Fan System:
7.5KW a fan Taiwan;
2-3. WE500 weighing sensor 4; A signal wiring box-Taiwan;
2-4. Operation Display System:
'm Control transmitter weighing one Taiwan, low-voltage electrical T.E. number.
2-5. Print System:
An Epson printer Taiwan.
3. Fiber feeding machine design parameters:
3-1. Total System Weight: 1200kg;
3-2. Hopper capacity: 60kg;
3-3. The expected weight of 1-Shield arbitrary set;
3-4. Control accuracy: + /-0.2KG;
3-5. The expected lift: 30M;
3-6. Power Capacity: 12KVA;
3-7. Rated Current: 22A;
3-8. Rated voltage: Three-phase 380VAC 5;
3-9. Input Signal Operation: Passive contact Signal